A synopsis of the frogs of the genus Eleutherodactylus from the Sierra Nevada de Santa Marta, Colombia

http://deepblue.lib.umich.edu/bitstream/2027.42/57147/1/OP711.pd

Identification of defects originated during the filling of cast pieces through particles modelling

In casting processes, strong recirculation zones may trap air, gases and strip particles of sand off the mold affecting seriously the quality of the cast pieces. Especially during the filling of molten pieces with large surfaces, several faults were detected which are responsible of considerable economic losses in such casting processes. The aim of this work is focused on the correct identification of these physical phenomena, through Computational Fluid Dynamics (CFD). A fully experimental work correlating a saline solution with similar properties than the liquid alloy was carried out in order to guess the flow behavior inside the mold. Different parameters such as filling time, temperature and velocity of the liquid alloy together with the geometrical design of the mold were taken into account. The simulated evolution profiles and propagation speeds were compared with the laboratory experiments showing good agreement, validating thus the numerical model. Through an advanced particles modeling feature from a commercial package, the potential to predict and later correct some casting defects was demonstrated. As a conclusion, the mold together with supply channels need to be carefully optimized in order to control the correct direction of solidification avoiding the appearance of oxides but also to prevent stripping the sand off the walls

Interaction of Eu-isotopes with saponite as a component of the engineered barrier

Bentonite is accepted as the best clay material in the engineered barrier of deep geological repositories (DGRs) for radioactive waste disposal. In recent years, the interactions between a wide range of rare-earth (REE) cations and smectites have been studied. A combined study of stable europium and radioactive isotopes is reported here. Saponite was subjected to hydrothermal reactions with stable and radioactive (152Eu) europium ions under subcritical conditions. The structural changes of saponite were evaluated by XRD and SEM. The effect of temperature and reaction time on the changes was quantified by measuring 152Eu through gamma spectrometry. The reaction between europium and saponite was a first-order reaction. The presence of Eu in the precipitate in an amount much higher than the cation exchange capacity of saponite confirmed participation of chemical reactions or surface adsorption in the europium immobilization, even at temperatures as low as 150°C. The reaction rate constant indicated that an 8- to 9-month period was needed for the completion, without significant changes, of the europium/saponite chemical reaction under the subcritical conditions of 200°C and 350°C.Medio Ambiente y Medio Rural y Marino 300/PC08/3-01.1Dirección General de Investigación Científica y Técnica CTQ2010-1487

La prótesis de expansión de Giannini en el tratamiento del pie plano-laxo infantil

Presentamos una serie de 50 pies plano-laxo infantil intervenidos con la prótesis de expansión de Giannini entre los años 1989 y 1992. Para evaluar la corrección obtenida se ha tenido en cuenta la morfología y sintomatología del pie, la valoración del fotopodograma y el ángulo de Moreau-Costa-Bartani y la línea de Sheade o eje de Meary-Tomeno en el estudio radiográfico. En la valoración final de resultados constatamos 14 casos (28%) excelentes, 31 (62%) buenos, 2 (4%) regulares y 3 (6%) malos.The authors present their experience in the surgical treatment of 50 essencial valgus fíat feet, performed bctween 1989 and 1992, using Giannini's subtalar expansive prosthesis. Pacients were assessed clinically, radiologically and by photopodography for the Moreau-CostaBartani angle and the Sheade line or Meary-Tomeno axis. In the final evaluation 14 cases (28%) were judged to achieved excellent results, 31 (62%) good results, 2 (4%) fair results and 3 (6%) poor result

Roaring high and low: composition and possible functions of the Iberian stag's vocal repertoire

We provide a detailed description of the rutting vocalisations of free-ranging male Iberian deer (Cervus elaphus hispanicus, Hilzheimer 1909), a geographically isolated and morphologically differentiated subspecies of red deer Cervus elaphus. We combine spectrographic examinations, spectral analyses and automated classifications to identify different call types, and compare the composition of the vocal repertoire with that of other red deer subspecies. Iberian stags give bouts of roars (and more rarely, short series of barks) that are typically composed of two different types of calls. Long Common Roars are mostly given at the beginning or at the end of the bout, and are characterised by a high fundamental frequency (F0) resulting in poorly defined formant frequencies but a relatively high amplitude. In contrast, Short Common Roars are typically given in the middle or at the end of the bout, and are characterised by a lower F0 resulting in relatively well defined vocal tract resonances, but low amplitude. While we did not identify entirely Harsh Roars (as described in the Scottish red deer subspecies (Cervus elaphus scoticus), a small percentage of Long Common Roars contained segments of deterministic chaos. We suggest that the evolution of two clearly distinct types of Common Roars may reflect divergent selection pressures favouring either vocal efficiency in high pitched roars or the communication of body size in low-pitched, high spectral density roars highlighting vocal tract resonances. The clear divergence of the Iberian red deer vocal repertoire from those of other documented European red deer populations reinforces the status of this geographical variant as a distinct subspecies

Silicoaluminates as “support activator” systems in olefin polymerization processes

In this work we report the polymerization behaviour of natural clays (montmorillonites, MMT) as activating supports. These materials have been modified by treatment with different aluminium compounds in order to obtain enriched aluminium clays and to modify the global Brönsted/Lewis acidity. As a consequence, the intrinsic structural properties of the starting materials have been changed. These changes were studied and these new materials used for ethylene polymerization using a zirconocene complex as catalyst. All the systems were shown to be active in ethylene polymerization. The catalyst activity and the dependence on acid strength and textural properties have been also studied. The behaviour of an artificial silica (SBA 15) modified with an aluminium compound to obtain a silicoaluminate has been studied, but no ethylene polymerization activity has been found yet

The Magnetic Electron Ion Spectrometer (MagEIS) Instruments Aboard the Radiation Belt Storm Probes (RBSP) Spacecraft

This paper describes the Magnetic Electron Ion Spectrometer (MagEIS) instruments aboard the RBSP spacecraft from an instrumentation and engineering point of view. There are four magnetic spectrometers aboard each of the two spacecraft, one low-energy unit (20–240 keV), two medium-energy units (80–1200 keV), and a high-energy unit (800–4800 keV). The high unit also contains a proton telescope (55 keV–20 MeV). The magnetic spectrometers focus electrons within a selected energy pass band upon a focal plane of several silicon detectors where pulse-height analysis is used to determine if the energy of the incident electron is appropriate for the electron momentum selected by the magnet. Thus each event is a two-parameter analysis, an approach leading to a greatly reduced background. The physics of these instruments are described in detail followed by the engineering implementation. The data outputs are described, and examples of the calibration results and early flight data presented

Reparación del cartílago articular con injerto libre de pericondrio estudio experimental

Ante la incapacidad de regeneración espontánea de lesiones profundas y amplias del cartílago articular, estudiamos la reparación cartilaginosa con plastias de pericondrio tomadas de la región condro-costal e implantándolas con su cara condrogénica sobre una lesión osteocondral realizada en la superficie articular rotuliana. Macroscópica e histológicamente, a la octava semana, el neocartílago formado tenía igual apariencia que el cartílago hialino normal, no existiendo separación entre el cartílago remanente y el neoformado a partir de la plastia. Estos resultados corroboran el gran potencial condrogénico del pericondrioFaced with the incapacity of spontaneous regeneration of deep and extensive lesions of the articular cartilage we studied the cartilaginous repair with pericondrium grafts taken from the chondro-costal region. Grafts were implanted with their condrogenic face over an osteochondral defect located at the surface of the patella. At the 8th week, the neocartilage formed had macroscopically and histologically, the same appearance as the normal hyaline cartilage, with no separation between the remaining cartilage and the neocartilage induced by the graft. These results corroborate the high chondrogenic potential of the perichondrium